CalAmp CDM-5030 3G Router Asset GPS Tracker

CalAmp CDM-5030 3G Router Asset GPS TrackerCalAmp CDM-5030 GPS Asset Trackers + Router GPS and communications Gateway with processor ARM9 400MHz 32 bit MCU capable of sending data in the LTE/HSPA/EVDO networks. Router GPS CDM-5030 of CalAmp can track in real time their automatic vehicle dispatch and controlled the hours of service inside a Tracking Management Platform in which all available reports, creating alerts and control of its most valuable assets, manage their fuel consumption control; CDM-5030 also lets you send SMS commands from a mobile phone or commands and update firmware or configuration via OTA. CalAmp CDM-5030 can be use an REST API to connect existing applications from our GPS tracking plataform that has European regulations of tachograph, from where you can manage some type of scheduled reports and control their vehicle care driving without requirement limit or you can manage the hours of service control of their drivers, in addition you can manage their drivers control of driving habits that help you to reduce cost and you can control their service routes or deliveries tasks depending of your need or manage their mobile asset fuel consumption control without any requirement limit, in addition you can control their automatic vehicle dispatch that help you to reduce cost and manage their mobile asset eco driving depending of your need. In our GPS tracking platform, you can also manage their mobile asset efficient driving without requirement limit and control their vehicle event management depending of your need or you can manage their vehicle preventative maintenance that help you to reduce company cost, in addition you can use our mobile applications for locate their CDM-5030 from a mobile phone and you can control their manual task registration depending of your need or you can use without extra cost our automatic data sending service to external servers.

The communications Gateway CalAmp CDM-5030 3G has the following interface for connecting external devices: 5 digital inputs, 4 digital outputs with open collector (200 mA), USB 2.0 port, also allows connecting peripherals such as can be: laptops, mobile data terminals, RFID readers for their control of driving habits, cameras via IP or VOIP voice function. The CDM-5030 3G Router GPS of CalAmp uses Linux 3.3 WRT operating system to manage all processes or events generated by this device and then send them through different communication channels or networks, depending on the configuration you select. CalAmp CDM-5030 3G Router is a solid alternative for GPS tracking high-value assets in their field service management or vehicle GPS tracking in service routes or deliveries tasks.

Additional Info

  • Brand: CalAmp
  • Model: CDM-5030
  • Target Market: Track & Trace, Vehicle recovery, Fleet Management, Telematics, 2-way messages w/drivers, In-car navigation
  • EVDO band: Dual band, 850/1900 Mhz.
  • HSPA/UMTS band: Penta/Hexa band, 800/850/900/1700/1900/2100 MHz
  • LTE band: 700/800/900/2100/2600 MHz (depending on configuration), Downlink up to 100 Mbps (peak burst rate), Uplink up to 50 Mbps (peak burst rate), Fallback to HSPA/CDMA (depending on configuration)
  • Operating System: Linux
  • Voice: Yes
  • Back up Battery: Yes
  • Internal Memory: Yes
  • Communication method: GPRS, TCP, UDP
  • Position by: Time, Distance
  • Sleep mode: Yes
  • Digital Inputs: >4
  • Internal events based: Yes
  • Antennas: GPS, GSM
  • Casing: Plastic
  • Extra Connectivity: Fix antennas, Microphone / Speaker, Driver ID, Serial Port, USB port, Wire harness
  • Made in: USA